CNC Machining Centers
Used Hurco VMX30: Sell or Buy at Auction
Hurco is an American CNC machine tool builder known for the WinMax conversational programming system that makes complex parts programming accessible without extensive G-code knowledge. Hurco machining centers are popular in job shops and toolrooms where programming flexibility and quick setup are priorities.
The Hurco VMX30 is a CAT40, or 40 taper, vertical machining center with 30 by 20 by 24 inch travels in X, Y, and Z and a 40 by 20 inch table, sized so job shops and toolrooms can clamp longer fixtures or stage more than one part per setup. Spindle speeds range from 10,000 rpm on earlier machines to 12,000 rpm, with up to 15,000 rpm on later direct-drive and high-speed configurations. Most units run Hurco's WinMax control, while older machines carry the earlier UltiMax, and both pair conversational programming with full G-code capability. That combination is the real draw: a machinist can program a fixture plate or a short-run bracket at the control in conversational mode without a CAM seat, then switch to tighter G-code work when a job calls for it. The 30 inch X travel and larger table set the VMX30 apart from Hurco's tighter VM1 and VMX24 without stepping up to a full production-class VMC. When a clean VMX30 comes to market, KD Auctions puts it in front of the job shops and toolrooms across our 500,000+ industry contacts, and a well-maintained unit with its original tooling, control documentation, and manuals typically draws active bidding.
Buying a Used VMX30
Job shops, toolrooms, prototype shops, and small-to-medium manufacturers. The WinMax control's ease of use attracts buyers who value quick-turn capability and conversational programming over full G-code environments.
Browse Upcoming Auctions →Selling Your VMX30
Hurco machines sell well at auction. The American brand, domestic parts availability, and intuitive WinMax control create active buyer demand. Newer VMX-series machines with updated controls achieve the strongest results.
Get a Free Consultation →Frequently Asked Questions
What is my Hurco VMX30 worth at auction?
Value depends on the machine's age, spindle hours, and overall condition, plus the control generation (newer WinMax versus the earlier UltiMax), the spindle speed option it was built with (10,000, 12,000, or a 15,000 rpm high-speed head), and the tooling, fixtures, and documentation that come with it. Rather than quote a number sight unseen, KD Auctions provides a free AMEA-accredited, USPAP-compliant appraisal that gives you both orderly liquidation value (OLV) and forced liquidation value (FLV), so you know exactly where the machine stands before you decide to sell.
How does the VMX30 compare to Hurco's VMX24 and VMX42, and how do I sell one?
The VMX30 sits in the middle of Hurco's VMX lineup. It carries 30 inches of X travel and a 40 by 20 inch table, more table and travel than the tighter VMX24 but well short of the VMX42's larger envelope, which makes it a natural fit for a shop that has outgrown a compact mill but does not need a full production floor machine. To sell one, call KD Auctions at 480.455.3910. A managed auction runs about 6 to 10 weeks from engagement to payout, onsite dispatch is scheduled within 48 to 72 hours, and commission is tailored to the engagement and quoted upfront, with most sellers paying nothing out of pocket.
About Hurco
Hurco is an American CNC machine tool builder known for the WinMax conversational programming system that makes complex parts programming accessible without extensive G-code knowledge.
View all Hurco models →