CNC Machining Centers
Used Hurco VM10: Sell or Buy at Auction
Hurco is an American CNC machine tool builder known for the WinMax conversational programming system that makes complex parts programming accessible without extensive G-code knowledge. Hurco machining centers are popular in job shops and toolrooms where programming flexibility and quick setup are priorities.
The Hurco VM10 is a mid-size, three-axis vertical machining center with roughly 26 x 16 x 20 inches of X, Y, and Z travel over a 30 by 16 inch table, a 15 hp CAT40 spindle that tops out around 10,000 rpm (later VM10i builds are rated to 12,000), and Hurco's WinMax control. WinMax is what sets the machine apart on the used market: it runs both plain conversational programming and standard G-code and NC files, so an operator can prove out a fixture or a one-off right at the machine and still load a posted program from CAM. The VM10 sits in the middle of Hurco's VM line, with more travel and table than the compact VM5 but a smaller footprint and lower cost of ownership than the larger VM20 and VM30, which makes it a common fit for job shops and toolrooms doing mold work, fixturing, and general prototype or short-run production. Because WinMax is quick to learn and Hurco is an American company, headquartered in Indianapolis, with a broad U.S. service and parts network, used VM10s draw steady interest from job shops, prototype houses, and small manufacturers stepping up from an older three-axis mill. When KD Auctions lists a VM10, that combination of a U.S.-supported builder, a widely serviced control, and 500,000+ industry contacts typically produces active, competitive bidding at close.
Buying a Used VM10
Job shops, toolrooms, prototype shops, and small-to-medium manufacturers. The WinMax control's ease of use attracts buyers who value quick-turn capability and conversational programming over full G-code environments.
Browse Upcoming Auctions →Selling Your VM10
Hurco machines sell well at auction. The American brand, domestic parts availability, and intuitive WinMax control create active buyer demand. Newer VMX-series machines with updated controls achieve the strongest results.
Get a Free Consultation →Frequently Asked Questions
What is a used Hurco VM10 worth at auction?
Resale value on a VM10 depends on its age, spindle hours, control generation (older MAX versus current WinMax), the tooling and workholding included, and overall condition, so we do not publish a fixed figure. KD Auctions provides a free AMEA-accredited, USPAP-compliant appraisal that documents both orderly liquidation value (OLV) and forced liquidation value (FLV) for your exact machine, giving you a defensible number before you decide anything.
How does the VM10 compare to other Hurco VM-series mills, and how do I sell mine?
The VM10 gives you about 26 by 16 by 20 inches of travel and a 30 by 16 inch table, more than the compact VM5 but in a smaller footprint and at a lower price point than the larger VM20 and VM30, so it tends to attract shops that have outgrown a small mill but do not need full production-size travels. To sell yours, call KD Auctions at 480.455.3910. A managed auction typically runs 6 to 10 weeks from engagement to payout, onsite dispatch is scheduled within 48 to 72 hours, and commission is tailored to the engagement and quoted upfront, with most sellers paying nothing out of pocket.
About Hurco
Hurco is an American CNC machine tool builder known for the WinMax conversational programming system that makes complex parts programming accessible without extensive G-code knowledge.
View all Hurco models →