CNC Machining Centers
Used Hurco TM10: Sell or Buy at Auction
Hurco is an American CNC machine tool builder known for the WinMax conversational programming system that makes complex parts programming accessible without extensive G-code knowledge. Hurco machining centers are popular in job shops and toolrooms where programming flexibility and quick setup are priorities.
The Hurco TM10 is a two-axis CNC turning center, a slant-bed lathe rather than a machining center, built on a 30-degree cast base so chips clear the work zone and drop straight to the conveyor. It runs a roughly 10-inch three-jaw chuck with about 23 inches of swing over the bed, a 12-station turret, and a bar capacity of about 3 inches, driven by a spindle motor near 30 horsepower with speeds to 3,000 rpm. That combination covers the everyday range of chucked and shaft work: facing, boring, threading, and grooving on parts up to roughly two feet long when a tailstock is fitted. Shops value the TM10 for Hurco's WinMax conversational control, which lets a machinist program a part right at the machine without a separate CAM seat, and for a compact footprint that suits small-batch and job-shop turning. Because options such as a programmable tailstock, chip conveyor, parts catcher, tool probe, and bar feeder are common on used units, condition and configuration vary widely from one machine to the next. At auction, TM10s move steadily through KD Auctions to job shops and small manufacturers looking for a proven, easy-to-program CNC lathe, and every listing reaches our network of 500,000+ industry contacts.
Buying a Used TM10
Job shops, toolrooms, prototype shops, and small-to-medium manufacturers. The WinMax control's ease of use attracts buyers who value quick-turn capability and conversational programming over full G-code environments.
Browse Upcoming Auctions →Selling Your TM10
Hurco machines sell well at auction. The American brand, domestic parts availability, and intuitive WinMax control create active buyer demand. Newer VMX-series machines with updated controls achieve the strongest results.
Get a Free Consultation →Frequently Asked Questions
What is a Hurco TM10 worth at auction?
Resale value depends on age, hours, condition, and control generation (older Ultimax versus newer WinMax), along with the turret, tailstock, chip conveyor, bar feeder, and chuck tooling included with the machine. KD Auctions offers a free AMEA-accredited, USPAP-compliant appraisal that reports both orderly liquidation value (OLV) and forced liquidation value (FLV), so you know where a specific TM10 stands before you decide whether to sell.
How do I sell a Hurco TM10 through KD Auctions?
Call 480.455.3910 to start with a free evaluation of the lathe. Once you are under agreement, a managed auction typically runs 6 to 10 weeks from engagement to payout, and onsite equipment is dispatched to the buyer within 48 to 72 hours of the sale close. Commission is tailored to the engagement and quoted upfront, and most sellers pay nothing out of pocket.
About Hurco
Hurco is an American CNC machine tool builder known for the WinMax conversational programming system that makes complex parts programming accessible without extensive G-code knowledge.
View all Hurco models →