CNC Vertical Machining Centers
Used Fadal 4525: Sell or Buy at Auction
Fadal is an American CNC vertical machining center brand: hugely popular in the North American job shop market through the 1980s and 1990s. Fadal VMCs are known for their rugged construction, the Fadal CNC 88HS and 32MP control systems, and exceptional longevity. Thousands of Fadal machines remain in active production use, creating a large and active used market.
The Fadal 4525 is a CNC vertical machining center built on Fadal's larger-format platform, with roughly 45 inches of X-axis travel and 25 inches of Y-axis travel, following Fadal's habit of naming a machine for its X and Y capacity. That puts it a clear step above the standard-travel VMC 4020, the 40-by-20 workhorse that made Fadal a fixture in North American job shops, adding about five inches of reach in each axis. It runs a 40-taper CAT40 spindle and, depending on the machine's vintage, either the Fadal CNC 88HS or the later 32MP control. The added table length and Y travel let a shop clamp longer parts or line up several vise setups across one table in a single run, while keeping the box-way rigidity and familiar Fadal control conventions the brand is known for. That middle-of-the-range capacity draws job shops and general manufacturers that have outgrown a standard-travel Fadal but don't need the footprint or power draw of Fadal's 60-inch-class machines like the 6030, and shops already running a Fadal fleet bid often because the control and CAT40 workholding carry straight over to their operators. KD Auctions moves 4525s through that same active Fadal bidding pool, drawing on 500,000+ industry contacts built over decades of job shop and toolroom liquidations.
Buying a Used 4525
Job shops, toolrooms, general manufacturing operations, and small manufacturers seeking affordable, proven vertical machining capability. Fadal's massive installed base means experienced operators are widely available, a key factor in buyer demand.
Browse Upcoming Auctions →Selling Your 4525
Fadal VMCs sell reliably at auction. The massive North American installed base creates a consistent buyer pool of job shops and toolrooms. Machines with recent servo and spindle service, and updated control boards, achieve the strongest results.
Get a Free Consultation →Frequently Asked Questions
What is a Fadal 4525 worth at auction?
Auction value for a Fadal 4525 depends on age, spindle hours, control condition and version, and the tooling package sold with it, not on the model number alone. Because the 4525 was built in smaller numbers than the common 4020, condition and tooling tend to drive the range even more. KD Auctions offers a free AMEA-accredited, USPAP-compliant appraisal that reports both orderly liquidation value (OLV) and forced liquidation value (FLV), so sellers have a defensible range before they commit to a sale method.
How does the Fadal 4525 compare to a Fadal 4020 or 6030?
The 4525 sits in between. It gives roughly five more inches of X and five more inches of Y travel than the 40-by-20 Fadal 4020, so a shop can fixture longer parts or run several vises across one table, but it keeps a smaller footprint than Fadal's 60-inch-class machines like the 60-by-30 6030. That middle ground appeals to job shops and toolrooms that have outgrown a standard-travel Fadal and want more capacity without stepping up to a heavier machine and its floor space and power demands. Call 480.455.3910 to discuss listing one. Commission is tailored to the engagement and quoted upfront, most sellers pay nothing out of pocket, and a managed auction runs 6 to 10 weeks from engagement to payout with onsite dispatch within 48 to 72 hours.
About Fadal
Fadal is an American CNC vertical machining center brand: hugely popular in the North American job shop market through the 1980s and 1990s.
View all Fadal models →