Press Brakes, Laser Cutters & Punch Presses
Used Amada HRB 050: Sell or Buy at Auction
Amada is the world's largest manufacturer of sheet metal fabrication equipment, with a dominant position in press brakes, laser cutting systems, punch presses, and shears. Amada machines are the standard equipment in metal fabrication shops across North America, making them highly liquid at auction with strong buyer demand.
The Amada HRB 050 is the entry point in Amada's HRB line of hydraulic press brakes, rated at about 50 metric tonnes of press force (roughly 500 kN, which US listings often show as 55 tons) on a compact bed of about two meters, or roughly seven feet of bending length. That size suits smaller, lighter-gauge work such as brackets, panels, and enclosures rather than the long or heavy-plate bends handled by the larger machines in the range. The HRB is a current-generation CNC brake, not an older NC unit: it runs on Amada's AMNC 3i touchscreen control with a CNC backgauge for repeatable programs, an inverter-driven hydraulic system that draws power on demand to hold down energy use, and an auto-crowning table that keeps a consistent bend angle across the full length. It sits at the bottom of a range that climbs through larger models like the 80-tonne HRB-8025 and tops out near 220 tonnes on four-meter beds, so shops reach for the HRB 050 when most of the daily work is small-part, light-gauge bending. Metal fabrication shops, HVAC manufacturers, and enclosure builders bid on this class because it covers everyday production without the footprint or cost of a bigger brake. KD Auctions moves these listings through its network of 500,000+ industry contacts, and Amada's standing as the leading name in sheet metal fabrication equipment keeps demand steady for its press brakes on the auction market.
Buying a Used HRB 050
Metal fabrication shops, HVAC manufacturers, enclosure manufacturers, and precision sheet metal shops. Amada's dominant market position means virtually every fabrication shop is a potential buyer, creating highly competitive bidding.
Browse Upcoming Auctions →Selling Your HRB 050
Amada fabrication equipment achieves among the strongest auction results in the sheet metal category. The brand's market dominance creates deep buyer demand. Fiber laser cutters and newer CNC press brakes particularly attract competitive bidding.
Get a Free Consultation →Frequently Asked Questions
What is an Amada HRB 050 press brake worth at auction?
Value depends on the machine's age, hours, condition, control, and tooling, so there is no single number to quote without seeing it. Because the HRB is a current-generation line, a well-kept HRB 050 with its AMNC 3i control and a full tooling set tends to draw stronger interest than a stripped or worn example. KD Auctions offers a free AMEA-accredited, USPAP-compliant appraisal covering both orderly liquidation value (OLV) and forced liquidation value (FLV), giving you a documented basis before you decide whether to sell.
How does the HRB 050 compare with the larger Amada HRB press brakes?
The HRB 050 is the smallest machine in Amada's HRB range, built for smaller parts and lighter-gauge material on a roughly two-meter bed, while larger models such as the 80-tonne HRB-8025 step up in tonnage and bed length for heavier work and longer bends, on up to the 220-tonne machines at the top of the line. All of them share the same AMNC 3i control and hydraulic drive platform. To sell an HRB 050 or any Amada press brake, call KD Auctions at 480.455.3910. Managed auctions run 6 to 10 weeks from engagement to payout, with onsite dispatch within 48 to 72 hours, and commission is tailored to the engagement and quoted upfront, so most sellers pay nothing out of pocket.
About Amada
Amada is the world's largest manufacturer of sheet metal fabrication equipment, with a dominant position in press brakes, laser cutting systems, punch presses, and shears.
View all Amada models →